Architectural Mesh

Multimesh provide bespoke mesh for architectural and decorative installations for architects, structural engineers and surveyors. Architectural mesh is woven using rigid wire. However a combination of rigid wire and braided wire cable is used where a more flexible mesh is required. The specifications are determined by varying the spacings between the wires or cables and through the use of different wire diameters.

Our range of metal mesh are created especially for architecture. Architectural mesh is used mainly as facades, shade screens and architectural ceilings. It can also be used for metal draperies for walls, as well as partitions. In addition, mesh for architecture is also used for staircase isolation screens. Furthermore, our metal mesh for architecture is used to manufacture a wide variety decorative and crimped mesh.

We design, manufacture and supply welded bridge panels, bridge infill panel mesh, also balustrade mesh and infill panels. In addition, mesh ceiling panels, floor gratings, mesh for pedestrian bridges, motorway bridges and also foot bridge mesh.

  • Balcony Mesh
  • Gratings
  • Welded Mesh
  • Stainless Steel
  • Architectural Mesh

We create British made customised design architectural mesh. To discuss your architectural mesh requirements contact Multimesh on 01744 820 666

stainless steel welded mesh panels

We stock a vast range of stainless steel welded mesh infill panels, grating and guards for building contractors and metal suppliers. Stainless steel grating is manufactured from high quality materials, the wedge wire finish is designed to complement driveways as well as tiled areas. Our grating also gives an attractive, elegant and prestigious feel to patio and drainage areas.

excelsior mesh

  • 3mm (10g) wire
    & 2.5mm (12g) wire
  • Open area can be from
    10mm – 100mm
  • High Tensile & Stainless
    Steel wire
imperial mesh

  • Lock Mesh
  • 2.5mm wire 10mm open area
  • High Tensile or Stainless Steel
kipping mesh

  • Hig h Tensile and Stainless
    Steel wire
  • 2.5mm wire (12g) 4.2 mm open area x 15.5 mm (L)
St. Paul
st-paul mesh

  • 2.5mm (12g) wire
    12.5mm open area
  • Stainless Steel Only
nevis mesh

  • Also known as Jag Mesh
  • 1.6mm wire (16g) 6.87mm open area - 1.8mm wire max (15g)
    6mm open area
  • High Tensile & Stainless Steel
St. Anthony
St. Anthony mesh

  • Same weave as our St James mesh but a lighter weight. The different weights on this particular weave alters the way the light reflects completely
  • 2mm wire (14g)
    1.6mm open area
  • Stainless Steel only
buxton mesh

  • Triple shoot slot 4.5mm open area 100mm (W) 2mm wire (14g)
  • High Tensile & Stainless Steel
lancashire mesh

  • 2mm Wire 14(g)
  • 21mm Slot (open area)
  • High Tensile & Stainless Steel
chequer mesh

  • Also known as MG Mesh
  • 2mm Wire
  • 11.75mm open area
  • High Tensile or Stainless Steel
St. James
st-james mesh

  • 2mm Wire 14(g)
  • 1.2mm open area
  • Stainless Steel only
cherwell mesh

  • Double crimped wire
    (also known as corrugated)
  • 3mm wire (10g) 16mm open area
  • High Tensile or Stainless Steel
sheephaven mesh

  • 5mm wire ( 5g)
  • 41mm Open area
  • High Tensile & Stainless Steel
comorant mesh

  • Lock Mesh
  • 1.8mm Wire 8mm Open area
  • High Tensile or Stainless Steel
embassy mesh

  • A plain weave in 2.5mm (12g)
    11.2 open area
  • High Tensile or Stainless Steel